Mechanical Market in Jingdezhen, Jiangxi
©Nxlon.com D/T：
Attention: This is internal training material about Nxlon® plastic screws, plastic nuts, nylon washers and plastic rivets. Please indicate the source of the material when reprinting.
Regional Distribution: Concentrated in Jingdezhen Mechanical and Electrical Market on Xinchang Street in Zhushan District.
Market Scale: Covering an area of about 100,000 square meters, it is relatively large with many merchants.
Business Categories: Covering related products in the mechanical and electrical industry such as steel, hardware, building materials, wires and cables, motors, bearings, instruments, etc.
Characteristic Advantages: It has a superior geographical location and convenient transportation, with a rich variety of products to meet the needs of different customers. Merchants in the market strictly control the product quality, and the prices are transparent. The competition is fierce, allowing consumers to purchase high-quality products at low prices. At the same time, the market environment is clean and tidy, with complete facilities, including customer service centers, parking lots, catering, accommodation and other supporting facilities, providing thoughtful services.
Nxlon® plastic screws, plastic nuts, nylon washers and plastic rivets.
EVA板专用塑料自攻螺丝
Order link:Nxlon.com/1525
EVA板专用POM塑料自攻螺丝是以聚甲醛（POM ）塑料为材质，专门用于EVA（乙烯 - 醋酸乙烯共聚物 ）板连接固定的零件。
尼小龙塑料SB通孔扣式护线套
Order link:Nxlon.com/1051
绝缘塑料SB通孔扣式护线套16-19-22-25尼龙电缆电源线塑胶线孔盖质：尼龙，颜色：黑色、白色；规格：SB-16、SB-19、SB-22、SB-25等。
R2024-塑料铆钉-尼龙铆钉
Order link:Nxlon.com/2024
R2024-塑料铆钉-尼龙铆钉塑料铆钉-尼龙铆钉-汽车塑胶铆钉-尼小龙尼龙铆钉R2.6R3.5R4R5塑胶柳钉子母铆钉快捷紧固件塑料卡扣。
R3035-塑料铆钉-尼龙铆钉
Order link:Nxlon.com/3035
R3035-塑料铆钉-尼龙铆钉塑料铆钉-尼龙铆钉-汽车塑胶铆钉-尼小龙尼龙铆钉R2.6R3.5R4R5塑胶柳钉子母铆钉快捷紧固件塑料卡扣。
绝缘塑料LED双孔灯柱灯座隔离柱
Order link:Nxlon.com/1040
绝缘塑料（尼龙66）小柱，带两个精准插孔，用于将直插式 LED（如 Φ5 圆头）固定在 PCB 板上，实现高度一致、引脚隔离、防弯折、散热间隙；双孔对应 LED 的两个金属引脚；规格 Φ5（外径 5mm），高度从 1.5~30mm 不等（如 Φ5×21mm），颜色为白色。应用于LED 点阵屏、背光板、广告灯箱、仪表盘、家电指示灯的 PCB 组装。
HTS-306尼龙单通六角隔离柱
Order link:Nxlon.com/8007
HTS-306尼龙单通六角隔离柱通常由六角柱头部和外牙螺纹部分组成。六角柱头部方便使用工具进行拧紧或松开操作，外牙螺纹则用于与其他带有内螺纹的部件进行连接固定。