Electronic Market in Shanghai, China
©Nxlon.com D/T:

Attention: This is internal training material about Nxlon® plastic screws, plastic nuts, nylon washers and plastic rivets. Please indicate the source of the material when reprinting.
Regional Distribution: It is mainly located in Huangpu District, Xuhui District, Pudong New Area, etc. The SEG Electronic Market in Huangpu District is located in the core of the Beijing Road business district, with a superior geographical location. There are some electronic markets in Xuhui District close to universities and research institutions, which is convenient for technical exchanges and the flow of talents. In Pudong New Area, some electronic markets rely on local high-tech industrial parks to form industrial agglomerations.
Market Scale: The SEG Electronic Market in Shanghai has an operating area of 18,000 square meters and more than a thousand merchants, taking a leading position in the electronic component market in the Yangtze River Delta. In addition, there are some smaller electronic markets distributed in various regions, jointly forming a relatively large electronic market system in Shanghai.
Business Categories: It includes electronic components, instruments and meters, power tools, network equipment, monitoring equipment, etc. Specifically, it includes resistors, capacitors, inductors, integrated circuits, sensors, oscilloscopes, multimeters, routers, switches, cameras, etc.
Characteristic Advantages: The SEG Electronic Market in Shanghai innovates its operation mode, launching a product promotion center and a shopping guide service center, and providing full-process logistics and distribution services, organically combining the physical market with e-commerce. At the same time, it forms a strategic cooperation with the China Electronics Fair and sets up an autumn exhibition branch venue in the market every year, building a good communication platform among producers, sellers, and buyers, promoting the prosperity of the electronic market.
Nxlon® plastic screws, plastic nuts, nylon washers and plastic rivets.
尼龙飞机头内螺纹扣式六角隔离柱
Order link:Nxlon.com/1005
尼龙飞机头内螺纹扣式六角隔离柱是一种用于电子设备等领域的塑料紧固件,一端为类似飞机头的形状塑料铆钉,这种造型便于扣紧电路板等部件。使用时,先将基板钻孔,再将隔离柱插入孔中,飞机头部分可以卡紧电路板,起到稳固的作用。
绝缘塑料法兰螺母
Order link:Nxlon.com/1034
尼龙法兰螺母的螺纹规格有:M3*0.5、M4*0.7、M5*0.8、M6*1.0、M8*1.25、M10*1.5、M12*1.75等白色尼龙螺母、黑色塑料螺母、透明塑料法兰螺母。
绝缘塑料LED双孔灯柱灯座隔离柱
Order link:Nxlon.com/1040
绝缘塑料(尼龙66)小柱,带两个精准插孔,用于将直插式 LED(如 Φ5 圆头)固定在 PCB 板上,实现高度一致、引脚隔离、防弯折、散热间隙;双孔对应 LED 的两个金属引脚;规格 Φ5(外径 5mm),高度从 1.5~30mm 不等(如 Φ5×21mm),颜色为白色。应用于LED 点阵屏、背光板、广告灯箱、仪表盘、家电指示灯的 PCB 组装。
拱型-YG-21-3-白色塑料拱形压线板
Order link:Nxlon.com/1055
这款产品型号为 YG-21-3 白色塑料压线夹,也常被称为马鞍型线卡、线固定夹,是电子电气领域常用的线材整理与固定配件,产品不含配套螺丝,需搭配螺丝安装使用。
绝缘尼龙十字沉头螺丝
Order link:Nxlon.com/1017
绝缘尼龙十字沉头螺丝采用知名品牌进口注塑级尼龙PA66、参照国标GB819标准规定的尺寸制造而成。现货沉头塑料螺丝的螺纹规格有:M3*0.5mm、M4*0.7mm等。
绝缘尼龙铆钉-LRD-4-LRD-5塑料卡扣
Order link:Nxlon.com/1019
绝缘尼龙铆钉-LRD-4-LRD-5塑料卡扣是一种常用于电子行业的紧固件,塑料铆钉直径:3.6mm,塑料铆钉头直径:7mm,公称长度:8.6mm等。
内3.2外7.0白色塑料直通柱ABS隔离柱
Order link:Nxlon.com/1012
内3.2外7.0白色塑料直通柱ABS隔离柱是一种以ABS(丙烯腈 - 丁二烯 - 苯乙烯共聚物 )为材质的PC板隔离柱。
尼小龙EHR塑料花瓣型护线套
Order link:Nxlon.com/1050
塑料梅花型护线套EHR尼龙扣式线束圈花瓣形保护环卡电线出线孔塞材质:尼龙,颜色:黑色、白色;规格:EHR-16、EHR-19、EHR-21、EHR-22、EHR-25等。









